Breakage cylinder head bolts on the car deal

Cylinder head bolts on the car handle breakage, if the little carelessness, processing of metal scrap generated in the process or the silica gel can easily fall into the cylinder hole, resulting in later use extreme abrasion and thus affect the life of the engine. To prevent this from happening, the demolition cylinder head bolts on the broken end with a green shell when the first paper or ordinary cardboard style by making a cylinder head gasket shielding plate. Produced when waste machine cylinder pad soaked some cardboard on silica gel after the rubbing, and then fit with the cylinder head bolt size cardboard rubbing in the hollow pistol pistol out of position on the screw holes (the other location, such as brim, a water hole and through hole for rubbing silica gel not barreled mouth), and finally cut cardboard with scissors edge can be. When used, the shielding plate on the cylinder at the top, so that the corresponding cylinder head bolt hole plate to cover the mouth piercing care, so that shielding plate and the cylinder on the plane paste the cover; then, as a general method of demolition demolition decapitation bolts; Finally, the brush will be on the scrap metal shielding board after careful cleaning can remove the shielding plate.