Inhaling silica gel is highly dangerous and requires immediate medical attention. The warning labels on common silica gel packets found in household items are actually there because of respiration concerns, not poison issues, as many people
Detail>>

Irritation and redness occurs from touching silica gel, and dryness and skin abrasions will result if extended exposure occurs. Always protect hands and bare skin from silica gel, including from potential secondary exposures due to touching
Detail>>

Silica gel is thought to cause harm to the environment, especially aquatic animal life and water sources. Cobalt chloride-containing silica gel is an especially hazardous waste and should be disposed of as such to limit these harmful environmental
Detail>>

Indicating Silica Gel changes color as it absorbs moisture. This effect is achieved by a chemical being added to the Silica Gel that reacts when it comes into contact with water. This is useful because it lets consumers know when the Silica Gel has
Detail>>

Cobalt Chloride has been used for decades as an indicator of moisture level. It is blue in its dry state then turns to purple then pink as it becomes saturated. Cobalt chloride isn't just used in indicating Silica Gel, paper can be infused with it to detect
Detail>>

pressure silicone itself is not a problem. The problem is not in the gel filtration filter is good, there are impurities or packaging process, the manual install in minutes, the bucket or plastic bag is not cleaned, so that the printing of the first
Detail>>

perfect time to stick the first printed pattern appears incomplete, because the patterns large patterns small, plastic head too hard. Plastic head is not on the steel version of the logo ink absorption in the plastic head up, it will not fully print
Detail>>

Glue or glue are the first oil when the customer will be printing large pictures and words from thick layer, about oil, oil is not the small letters because of their hardness or plastic head too much, not steel design, the color picture in the plastic
Detail>>

As a result of fumed silica reinforced silicone rubber compound of fluorine during storage will become solid and ductility decreased gradually lost processing performance. To prevent and reduce this "structural" tendencies, the general
Detail>>

Comparison of fluorine soft silicone rubber, has a certain plasticity. May, without a direct use of plastic mixing mill or mixer for mixing, but because of pure fluorine silicon rubber adhesive roll more easily, difficult to operate, on with the agents,
Detail>>