1. As a general rule saturated desiccant will require a minimum of 4-6 hours at a temperature of between 105-130oC throughout the entire desiccant bed for the reactivation process to be effective and reduce the adsorbed moisture to less than 2% by weight.
Detail>>

Color indicator silica gel is used to dry seed for long-term storage. It may also be used to dry flowers, certain food stuffs, cameras, tools, shoes, clothing, historical artifacts, display cases, and electronic instruments. It may be used to protect
Detail>>

Desiccant bags provide an economic and effective way of protecting against moisture damage during transit and storage. The bags are filled with non-indicating beaded silica gel desiccant with capacities ranging from 1 gram to 500 gram.
Detail>>

We offer a qualitative range of Blue Silica Gel that is manufactured using premium grades of raw material. It is a type of dry desiccant which helps in the avoidance of humidity damage. It is a humidity controlling desiccant with a large surface area.
Detail>>

Standard indicating silica gel is often used within microclimates to control Relative Humidity (see Conserve O Gram 1/8). Cobalt is present in small concentrations (0.5 to 1.0% by weight) in indicating silica gel. As of July 1, 2000, British Chemical
Detail>>

Inorganic silica is a highly active adsorbent material, usually with sodium silicate and sulfuric acid reaction, produced by aging, acid bulbs and a number of post-processing procedures. An amorphous material is its chemical formula mSiO2.
Detail>>

The main component is silica gel, chemically stable, do not burn. Silica gel is an amorphous silicon dioxide, should the dust in the workshop content control is not greater than 10 mg / cubic meter, the need to improve the ventilation, wear a
Detail>>

According to the schedule on glass for water treatment, experimental films in the 50 degree temperature 5 hours, remove and cool to room temperature, wipe with a clean gauze coated surface, visual state of coated surface.
Detail>>

Good water repellent coating to be fully cured, can be wiped of from the beginning, waterproof, waterproof continuous, smooth coating surface and the degree of impact study, evaluation of performance, respectively.
Detail>>

Fluorosilicone rubber variety, has been large-scale production of fluorine rubber mainly γ-trifluoropropyl methyl siloxane monomer for the polymer structure, but also developed taking FEM26, FEM2802, SKTFT-50 copolymer represented
Detail>>